PARADE UNIFORM
Marching Band Parade Uniform Guide
Here is the step-by-step guide to putting on your marching band uniform correctly, ensuring everything sits at the right length and looks sharp for performance.
Remove all jewelry and makeup: Take off all rings, necklaces, bracelets, and facial piercings before putting on any part of the uniform. Keep your face completely free of makeup, glitter, or face paint unless explicitly instructed by your director. Jewelry can snag on the delicate fabric of the uniform, and makeup will easily stain the high collars, or any part of the uniform it comes in contact with.
Nails and hair: ¼ inch nails-nude colors only for polish colors, white french tips ok. Shoulder length or longer hair needs to be pulled back into a neat ponytail or braid. If the hair around your face is long enough to get in your eyes it needs to be pulled back from the face - bobby pins, braid, elastics.
Bring your Socks/Shoes: Black marching socks($5 charge for new if lost/forgotten), marching shoes
Step 1: The Base Layer - "Unders", T-shirt, Socks
Wear your "unders": Wear your lightweight black shorts or leggings. These prevent chafing, absorb sweat, fit easily under your bibbers, and allow you to change quickly in public areas.
Wear your Show T-shirt: Whenever you are not wearing the full uniform, being in our matching show t-shirt and ‘unders’ will make us still look professional and ‘uniform’.
Put on your marching socks: Pull up your long, solid black marching socks. These must be high enough that no skin shows when you sit or march.
Step 2: Bibbers & Shoes
Step into your bibbers: Pull the jumpsuit-style pants up and slide the straps over your shoulders. Zip up the front and snap the fly. Do not pull on your bibbers over shoes.
Adjust the bibber length: Your bibbers should be adjusted so the hem hits right at the top of your marching shoes without bunching up drastically, but long enough that they don't look like floods when you march.
Use the adjustable shoulder buckles to raise or lower the rise.
Use the snaps sewn up the inner several inches of the bottom of the bibbers to adjust the leg length. Fold the cuff inward and snap it to the correct length.
Put on your marching shoes: Tie them securely and tuck the laces into the sides of the shoes so they do not dangle or come untied on the field. Keep them clean and shiny.
Step 3: The Jacket
Slide into the jacket: Put your arms through the sleeves. The zipper should be in the back. Marching jackets are stiff, so take your time pushing your shoulders all the way into the pads.
Zip up the jacket: Since the zipper is in the back, you will need the help of a fellow band member for this step. Help those around you with this step as well.
Adjust the sleeve length: Marching cuffs must be adjusted so they do not swallow your hands or ride up too high. The edge of the cuff should sit precisely at your wrist bone when your arms are resting at your sides. When your arms are raised in playing position, the sleeve should still cover your wrist completely.
Reach inside the sleeve to find the internal sizing snaps near the wrist cuff. Fold the cuff inward and snap it to the correct length.
Step 4: Gauntlets & Accessories
Put on your gauntlets: Slide the gauntlets over your forearms.
The wide end should face up toward your elbow, and the narrower end should point toward your wrist.
Secure the Velcro on the underside of your arm.
The gauntlet should overlap the jacket sleeve completely, leaving no gaps where your "unders" or wrist skin can be seen.
Put on your gloves: (Drum Majors only) Put your gloves on after the gauntlets. Tuck the wrist fabric of the glove underneath the gauntlet opening for a seamless look.
Step 5: The Shako (Hat)
Prepare your hair: Tie your hair back tightly. It must be completely tucked up inside the shako. A halo or double bottom-up french/dutch braids are common. Use bobby pins and hair spray to ensure no loose strands fall out.
Place the shako on your head: Set the shako straight on your head.
The brim should sit exactly one to two finger-widths above your eyebrows, parallel to the ground. It should not tip backward or obscure your vision.
Adjust the chin strap: Place it snugly under your chin. Adjust the side buckles so the strap holds the hat securely against wind and high-step marching.
Insert the plume: (Usually done by someone wearing gloves right before performance)
Insert the plume wire directly into the small socket at the top front of the shako. Push it down firmly so it doesn't wobble.
Do not remove the plume yourself or put the shako somewhere the plume will rub against anything, or be bent or crushed by anything. They are extremely fragile.
Uniform Hanging Instructions
Hang the bibbers:
Step 1: Locate the creases. Hold the bibbers by the bottom hems and find the sharp, vertical pressed creases running down the front and back of each leg.
Step 2: Fold along the creases. Bring the two leg hems together, ensuring the front creases match up and the back creases match up. The legs should now be folded flat against each other, with the sides of the pants facing outward.
Step 3: Drape over the bar. Slide the folded legs through the opening of the hanger. Fold them over the horizontal bar at the knees or mid-thigh.
Step 4: Balance the weight. Pull the legs through until the weight is evenly balanced on both sides of the bar so the bibbers do not slide off and the shoulder straps do not droop too low.
Hang the jacket:
Step 1: Align the back of the jacket with the outside of the curved part of the hanger opposite where your name label is located. This allows your name label to be visible when hung.
Step 2: Guide the shoulders first. Hold the hanger and carefully guide it into each shoulder opening. Ensure that you have not put the hanger tips into the small air vent slits in the back.
Step 2: Zip & fasten. Zip up the front zipper at least halfway and fasten the top button. This maintains the jacket's structural shape and prevents it from slipping off or warping while hanging.
Handling & Care: Always handle your uniform pieces with care. Never place or drop them on the ground. Avoid bunching the fabric together when holding them or placing them on a hanger.
Uniform Etiquette & Maintenance
Strictly avoid eating or drinking (except water) while in uniform: Keep all food, sodas, and colorful sports drinks away from your uniform at all times. Stains are incredibly difficult and expensive to remove from professional band fabrics. If you must eat during a long event or competition day, completely remove your jacket and gauntlets first and hang them in a safe spot where they will not get knocked on the ground or dirty.
Uniform Sizing: If you feel like the uniform is too tight or the seams are straining when you bend, twist, or sit, please come and have us size up the uniform.
Maintenance: If any part of the uniform is broken, not working, fraying, or coming apart, please report it immediately. Many issues are much easier to fix when the issue first begins & before it becomes a larger problem.
Marching Socks: You will be given one pair of long black socks at the beginning of the year. If additional socks are needed throughout the season, there will be a $5 charge.